Show Igmpsnooping - NETGEAR ProSAFE M7100-24X Reference Manual

ProSAFE M7100 Managed Switches
Default Enabled
Format
set igmp header-validation
Mode Global Config
no set igmp header-validation
This command disabled the IGMP IP header validation..
Format
no set igmp header-validation
Mode Global Config

show igmpsnooping

This command displays IGMP Snooping information. Configured information is displayed whether
or not IGMP Snooping is enabled.
Format
show igmpsnooping [<slot/port> | <vlan_id>]
Mode Privileged EXEC
When the optional arguments <slot/port> or <vlan_id> are not used, the command
displays the following information:
Term Definition
Admin Mode Indicates whether or not IGMP Snooping is active on the switch.
Multicast Control The number of multicast control frames that are processed by the CPU.
Frame Count
Interface Enabled The list of interfaces on which IGMP Snooping is enabled.
for IGMP
Snooping
VLANS Enabled The list of VLANS on which IGMP Snooping is enabled.
for IGMP
Snooping
When you specify the <slot/port> values, the following information appears:
Term Definition
IGMP Snooping Indicates whether IGMP Snooping is active on the interface.
Admin Mode
Fast Leave Mode Indicates whether IGMP Snooping Fast-leave is active on the interface.
Switching Commands
116