Table of Contents
Advertisement
3.2.
BATTERY PACK CHARGING
It is necessary to charge the lithium-ion battery fully before its first use.
1. Install the battery pack onto the receiver. Ensure that the receiver is switched OFF.
2. Insert the AC power adapter DC plug into the jack located on the back of the fast-charger
cradle, then plug the AC power adapter into an AC line outlet.
3. Insert the receiver into the fast charger cradle as pictured.
The AC power adapter may be connected directly to the receiver, however charging is much
slower.
Approximate charging times of a fully discharged battery pack:
・ AC power adapter connected to receiver:
・ AC power adapter connected to fast charger cradle: 6〜7 hours
Note: While it is possible to switch the receiver ON and operate it while charging the battery
pack, the charging time will be significantly longer.
CC-10
A:
When the AC power adapter is connected directly to the receiver, after approximately
10 seconds the LCD will indicate "CHARGING". When the battery is fully charged, this indi-
cation will disappear. If the receiver is switched ON while the charger is still connected, the
icon will appear at the top of the LCD. A minute later it will change to
the battery is charging.
Important:
Do not leave the AC power adapter connected directly to the receiver after the charge is
complete, as long-term overcharging can degrade the lithium-ion battery pack and signifi-
cantly shorten its useful life.
A
AC power adapter may be connected either directly
to the receiver or to the fast charger cradle.
B
90%charge：8～9 hours
Full charge：11～12 hours
AA-10
14
, indicating
Advertisement
Table of Contents
