Setting Time - AOR AR5000 Operating Manual

14-2 Setting time

Clock 1 and clock 2 may display different hours and text
but the minutes and seconds will be common to both
clocks.
To set the initial real time, press
hold the key for more than one second then follow
the prompts.
Initial Set
1 To access the clock set menu, press
and hold the key for more than one second. The
settings for Clock 1 are first displayed / entered followed
by those for clock 2.
2 The menu prompts "
to select between 24hr "
12hr " " display. The selection of 12/24hrs
affects BOTH clocks.
3 Press the key to move on to time input (the
key may be used during initial set to scroll
backwards, press and hold for more than one second).
The legend " " is displayed on the right hand side of the
LCD to indicate that the setting of clock 1 is in progress.
The hours may be adjusted using the
minutes using the
are used, the seconds are frozen to allow
or
accurate time setting from a TIME STANDARD, the
legend "- -" is displayed between hours, minutes and
seconds to indicate that initial set is in progress.
4 Press the key to move on to TEXT.
PAGE 62 AR5000 OPERATING MANUAL
then press and
then press
", rotate the
" and
and
. As soon as the
Use the (and numeric keypad if you wish) to select
the required three character text comment for clock 1...
such as " ".
This is carried out in the same way as text input to memory
or search banks, the
required character and quick presses of the
keys are used to change the text input position left / right.
5 Press and hold the
second to move onto the input selection for clock 2.
6 The legend " " is displayed on the right hand side of
the LCD to indicate that the setting of clock 2 is in
progress. The hours may be adjusted using the
or as the minutes and seconds are
taken from clock 1. At this point the seconds are frozen
to allow accurate time setting, the legend "- -" is displayed
between hours, minutes and seconds to indicate that initial
set is still in progress.
7 Press the key to move on to TEXT.
Use the (and numeric keypad if you wish) to select
the required three character text comment for clock 2...
such as " ".
8 Pressing at this time will commit the input data
and start the seconds counting. However for accurate
setting, display clock 1 again. Press and hold the
key for more than one second to scroll passed "
" then press the
second to display clock 1.
is rotated to select the
key for more than one
key again for more than one