Ct8200 Optional Ctcss Slot Card; Ctcss Tone Squelch - AOR AR8200 Manual

inverter is active while the legend "68" indicates the current
'flip' value in use.
To speed up the toggling of voice inverter,
effectively toggle the voice inverter option on/off. This is
achieved as the default is set to voice inverter ON (by accessing
the voice inverter menu) so that every time the voice inverter
menu is accessed, the voice inverter is automatically activated.
1. For example, assume that the voice inverter is
currently OFF.
menu cursor will move
to "ON".
2.
3.
The sequence then repeats each time you
Note: Using the voice inverter to monitor normal transmissions will
cause them to distort and sounds rather like tuning across a busy short
wave band using USB.

18-3 CT8200 optional CTCSS slot card

The CT8200 enables the AR8200 to search for 50 CTCSS tones which may be in
use on the current receive frequency and to save a specific CTCSS tone (from
the 50 tones available) into each VFO, each search bank and every memory
channel individually. CTCSS is used by many amateur band repeaters, public
utilities and private mobile radio services where shared resources are used,
CTCSS ensures that operators only hear traffic intended for them.
Insert the CT8200 slot card and switch the AR8200 on, select VFO mode.
to access the slot card option menu. The AR8200 will have recognised that the
CT8200 has been fitted so will present the CTCSS menu.
The legend "CTCSS" confirms selection of the CTCSS menu.
keys to toggle the CTCSS facility between OFF / ON / SRCH (default is off). To abort entry and
exit the menu
Note: You won't be able to audibly hear a CTCSS tone due to the low frequencies
employed and audio characteristics of the AR8200 (and other receivers).

18-3-1 CTCSS tone squelch

to access the voice inverter menu, the voice inverter
to revert to VFO mode with the voice inverter on.
to immediately toggle the voice inverter off.
.
to
.
the key or use the