Configuring The Pppoe Client; Figure 134 Internet Access Setup (Pptp); Table 93 New Fields In Menu 4 (Pptp) Screen - ZyXEL Communications ZyAIR G-2000 Plus User Manual

ZyAIR G-2000 Plus User's Guide

Figure 134 Internet Access Setup (PPTP)

The following table contains instructions about the new fields when you choose PPTP in the
Encapsulation field in menu 4.

Table 93 New Fields in Menu 4 (PPTP) Screen

FIELD
Encapsulation
Idle Timeout

24.4 Configuring the PPPoE Client

If you enable PPPoE in menu 4, you will see the next screen. For more information on PPPoE,
please see the appendix.
277
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPTP
Service Type= N/A
My Login=
My Password= ********
Retype to Confirm= ********
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
DESCRIPTION
Press [SPACE BAR] and then press [ENTER] to choose PPTP. The encapsulation
method influences your choices for the IP Address field.
This value specifies the time, in seconds, that elapses before the ZyAIR automatically
disconnects from the PPTP server.
Chapter 24 Internet Access