Power Connector Cable - HP Pavilion m6 Maintenance And Service Manual

2. Remove the subwoofer (2) from the base enclosure.
NOTE:
performance of the subwoofer.
Reverse this procedure to install the subwoofer.

Power connector cable

Description
Power connector cable (includes bracket)
Before removing the power connector cable, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
The subwoofer includes two rubber isolators (3). These isolators are crucial to the
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Top cover on page
48), and then remove the following components:
49)
53)
57)
66)
Component replacement procedures
Spare part number
686900-001
91