Usb Board - HP Pavilion m6 Maintenance And Service Manual

USB board

Description
USB board
Before removing the USB board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
e. Speakers (see
Remove the USB board:
1. Disconnect the subwoofer cable (1) from the USB board.
2. Remove the Phillips PM2.5×3.5 screw (2) that secures the USB board to the base enclosure.
3.
Remove the USB board (3) from the base enclosure.
Battery on page 48), and then remove the following components:
Hard drive on page 49)
Optical drive on page
Keyboard on page 57)
Top cover on page 66)
Speakers on page 87)
53)
Component replacement procedures
Spare part number
686918-001
89