Table of Contents
Advertisement
7.
Disconnect the display panel cable (2) from the system board.
8.
Release the wireless antenna cables from the clips (3) and routing channel built into the
base enclosure.
CAUTION:
support the display assembly can result in damage to the display assembly and other computer
components.
9.
Remove the four Phillips PM2.5×5.0 screws (1) that secure the display assembly to the
base enclosure.
94
Chapter 4 Removal and replacement procedures
Support the display assembly when removing the following screws. Failure to
- Quick Links:
- Display
- Illustrated Parts Catalog
- Memory Module
Hide quick links:
Advertisement
Table of Contents
