Heat Sink - HP Pavilion m6 Maintenance And Service Manual

Reverse this procedure to install the system board.

Heat sink

NOTE: The heat sink spare part kit includes replacement thermal material.
Description
For use only on computer models equipped with an AMD processor and a graphics subsystem
with discrete memory
For use only on computer models equipped with an AMD processor and a graphics subsystem
with UMA memory
For use only on computer models equipped with an Intel processor and a graphics subsystem with
discrete memory
For use only on computer models equipped with an Intel processor and a graphics subsystem with
UMA memory
Before removing the heat sink, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
e. Fan (see
f. System board (see
Remove the heat sink:
1. Turn the system board upside down, with the front toward you.
NOTE:
memory. See step 3 for heat sink removal information for computer models equipped with a
graphics subsystem with UMA memory.
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Top cover on page
Fan on page 76)
System board on page
Step 2 applies to computer models equipped with a graphics subsystem with discrete
48), and then remove the following components:
49)
53)
57)
66)
78)
Component replacement procedures
Spare part number
687231-001
687230-001
686905-001
686904-001
81