System Board - HP Pavilion m6 Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal material.
Description
For use only on computer models equipped with an AMD processor and an HD7670M graphics
subsystem with 2048-MB discrete memory
For use only on computer models equipped with an AMD processor and a graphics subsystem
with UMA memory
For use only on computer models equipped with an Intel processor and a 7670M graphics
subsystem with 2048-MB discrete memory
For use only on computer models equipped with an Intel processor and a 7670M graphics
subsystem with 1024-MB discrete memory
For use only on computer models equipped with an Intel processor and a graphics subsystem with
UMA memory
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. WLAN module (see
e. Solid-state drive (see
f. Top cover (see
g. Fan (see
NOTE: When replacing the system board, be sure that the following components are removed from
the defective system board and installed on the replacement system board:
●
Memory module (see
●
Heat sink (see
●
Processor (see
78 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
WLAN module on page
Solid-state drive on page
Top cover on page
Fan on page 76)
Memory module on page
Heat sink on page 81)
Processor on page 84)
48), and then remove the following components:
49)
53)
57)
62)
65)
66)
56)
Spare part number
687229-001
687227-001
686930-001
686929-001
686928-001