Speakers - HP Pavilion m6 Maintenance And Service Manual

Reverse this procedure to install the optical drive connector board.

Speakers

Description
Speakers (include cables and 4 rubber isolators)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
e. Fan (see
Remove the speakers:
1. Remove the three Phillips PM2.0×2.0 broad head screws (1) that secure the speakers to the
base enclosure.
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Top cover on page
Fan on page 76)
48), and then remove the following components:
49)
53)
57)
66)
Component replacement procedures
Spare part number
686925-001
87