HP Pavilion m6 Maintenance And Service Manual page 93

Before removing the processor, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
e. Fan (see Fan on page
f. System board (see
g. Heat sink (see
Remove the processor:
1. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise, until you hear a click.
2. Lift the processor (2) straight up, and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon embossed
on the processor socket when you install the processor.
Battery on page 48), and then remove the following components:
Hard drive on page 49)
Optical drive on page
Keyboard on page 57)
Top cover on page 66)
76)
System board on page
Heat sink on page 81)
53)
78)
Component replacement procedures
85