Fingerprint Reader Board - HP Pavilion m6 Maintenance And Service Manual

Fingerprint reader board

Description
Fingerprint reader board (includes bracket and cable)
Before removing the fingerprint reader board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
Remove the fingerprint reader board:
1. Turn the top cover upside down, with the front toward you.
2. Release the fingerprint reader board cable from the opening (1) in the top cover.
3. Detach the fingerprint reader board cable (2) from the top cover. (The fingerprint reader board
cable is attached to the top cover with double-sided tape.)
72 Chapter 4 Removal and replacement procedures
Battery on page 48), and then remove the following components:
Hard drive on page 49)
Optical drive on page
Keyboard on page 57)
Top cover on page 66)
53)
Spare part number
686906-001