Subwoofer - HP Pavilion m6 Maintenance And Service Manual

Reverse this procedure to install the USB board.

Subwoofer

Description
Subwoofer (includes cables and 2 rubber isolators)
Before removing the subwoofer, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
e. Speakers (see
f. USB board (see
Remove the subwoofer:
1. Remove the two Phillips PM2.0×2.0 broad head screws (1) that secure the subwoofer to the
base enclosure.
90 Chapter 4 Removal and replacement procedures
Battery on page 48), and then remove the following components:
Hard drive on page 49)
Optical drive on page
Keyboard on page 57)
Top cover on page 66)
Speakers on page 87)
USB board on page 89)
53)
Spare part number
686926-001