Display Panel Cable Assembly - HP Envy 6 Maintenance And Service Manual

Before removing the antenna cables:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
5. Remove the base enclosure (see
6. Disconnect the battery cable (see
Remove the WLAN antenna cables:
▲ Remove the WLAN antenna transceivers (1), and then remove the cables (2) from the right and
left sides of the hinge.

Display panel cable assembly

Description
Display panel cable assembly
Before removing the display panel cable assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
Display panel on page
Base enclosure on page
Battery on page 36).
Spare part number
686592–001
Display panel on page
32).
34).
32).
Component replacement procedures 67