System Board - HP Envy 6 Maintenance And Service Manual

Remove the fan:
1. Disconnect the fan cable (1).
2. Remove the 2 Phillips PM screws (2) securing the fan to the unit, and then lift the fan upwards
(3).
3. Remove the piece of tape on the underside of the heat sink that secures the fan to the unit (4).

System board

NOTE: The system board spare part kit includes replacement thermal material.
Description
For use only with computer models equipped with an Intel 1.8GHz processor, but not WWAN
capability (includes replacement thermal material)
For use only with computer models equipped with an Intel 1. 8GHz processor but not WWAN
capability (includes replacement thermal material)
For use only with computer models equipped with an Intel 1.8GHz processor, but not WWAN
capability (includes replacement thermal material)
For use only with computer models equipped with an Intel 1.7GHz processor, but not WWAN
capability (includes replacement thermal material)
For use only with computer models equipped with an Intel 1.7GHz processor, but not WWAN
capability (includes replacement thermal material)
For use only with computer models equipped with an Intel 1.7GHz processor (includes replacement
thermal material)
For use only with computer models equipped with an Intel 1.4GHz processor (includes replacement
thermal material)
48 Chapter 4 Removal and replacement procedures
Spare part number
693228–001
693228–501
693228–601
693229–001
693229–501
693229–601
693230–001