Media Card Reader Assembly (Smart Card Reader) - HP Envy 6 Maintenance And Service Manual

2. Remove the cover (2).

Media card reader assembly (smart card reader)

Description
Media card reader assembly (smart card reader)
Before removing the media reader assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
5. Remove the base enclosure (see
6. Disconnect the battery cable (see
Remove the media card reader assembly:
1. Remove the 2 screws (1), and then lift the media card reader assembly (2).
Display panel on page
Base enclosure on page
Battery on page 36).
32).
34).
Component replacement procedures
Spare part number
688004–001
55