Security Bracket - HP Envy 6 Maintenance And Service Manual

3. Remove the subwoofer (3).

Security bracket

Description
Security bracket (included in power connector kit)
Before you remove the security bracket, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
5. Disconnect the battery cable (see
6. Remove the subwoofer (see
Remove the security bracket:
1. Remove the 2 Phillips PM screws (1).
Spare part number
686593-001
Display panel on page
Battery on page 36).
Subwoofer on page 56).
32).
Component replacement procedures 57