HP Envy 6 Maintenance And Service Manual page 72

For use in country or region:
Black/silver backlit keyboard for
use in Switzerland
Black/Silver backlit keyboard for
use in Saudi Arabia
Before removing the keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
5. Remove the base enclosure (see
Remove the keyboard:
1. Turn the computer right-side up with the front facing you.
2. Remove the 16 Phillips PM 2x3 screws.
64 Chapter 4 Removal and replacement procedures
Spare part number: For use in country or region:
692759–BG1 Black/silver backlit keyboard for use
in the Netherlands
692759–171 Black/silver backlit keyboard for use
in Denmark, Norway, Finland
Display panel on page
Base enclosure on page
Spare part number:
692759–B31
692759–DH1
32).
34).