Fan - HP Envy 6 Maintenance And Service Manual

7. Remove the top cover (see
8. Disconnect the battery cable (see
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the
memory module. (The memory module tilts up.)
CAUTION:
the components on the memory module.
2. Slide the memory module forward (2).
3. Remove the memory module (3).
Reverse this procedure to install a memory module.

Fan

Description
Fan
Before removing the fan:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
5. Remove the base enclosure (see
6. Disconnect the battery cable (see
Top cover on page
Battery on page
To prevent damage to the memory module, hold it by the edges only. Do not touch
Display panel on page
Base enclosure on page
Battery on page
66).
36).
Spare part number
686580–001
32).
34).
36).
Component replacement procedures 47