5.
Remove the touchpad from the computer (3).
Reverse this procedure to install the touchpad.
Fan
To remove the fan, use this procedure and illustration.
Table 5-9
Fan description and part number
Description
Fan
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the fan assembly:
1.
Remove the three Phillips M2.0 × 4.0 screws (1) that secure the fan to the computer.
42
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page
33).
Spare part number
M50402-001
31).
31).