Making Connections; Try Listening To Some Sounds; Connecting Headphones And Speakers; Connecting A Foot Switch - Roland Sound Canvas SK-500 Owner's Manual

Making Connections

Try Listening to Some Sounds

The SK-500 is not equipped with an amplifier or speakers. To listen to
sounds with the SK-500, connect headphones or speakers.

Connecting Headphones and Speakers

* To prevent malfunction and/or damage to speakers, make sure to move the
[VOLUME] slider towards you to lower the volume.
* Make sure that the power to any device being connected is turned off.
1
Connect the AC Adaptor to the AC Adaptor socket.
2
If using headphones, connect the headphones to one of the
PHONES jacks.
3
If you are connecting speakers or other audio gear, use an
audio cable to connect one of the SK-500's audio jacks to the
Audio IN jack of the audio device being connected.

Connecting a Foot Switch

Connect the foot switch included with the SK-500, or a pedal switch (DP-2),
damper pedal (DP-6), or expression pedal (EV-5) to this jack.
fig.connect-e
Headphone
Monitor speakers/
Audio systems
12
Connect here if you also want to listen to
sounds from other sound generators or devices
(output to headphones and speakers).
AC adaptor
Audio
cable
To Audio Input jack
(such as LINE IN)
Pedal switch
(Included in the package)
SK-500
To prevent malfunction
and/or damage to speakers
or other devices, always
turn down the volume, and
turn off the power on all
devices before making any
connections.
Use only the specified
expression pedal (EV-5;
sold separately). By
connecting any other
expression pedals, you risk
causing malfunction and/
or damage to the unit.