EPSON Stylus Pro 7000
VIBRATION & SHOCK
See the following table.
Table 1-12. Vibration and Shock
Vibration
Condition
Resistance
0.15G
Operating
10~55Hz
0.5G
Storage
10~55Hz
Notes:
* Make sure the printhead is capped during transportation and storage. To cap
the printhead, turn the power on (with ink cartridges installed) and turn the
power off when the printheads are capped.
* To thaw frozen ink in the printer or cartridge, leave the printer out at a
temperature of 25°C (77°F) for approximately three hours.
Product Description
Shock
Notes
Resistance
1G
maximum 1ms
X/Y/Z directions
2G
maximum 2ms
1.1.9 Controller
CPU:
RAM:
Interfaces:
Features
Hitachi SH7043, 33Mhz
8MB + 2MB (fixed)
IEEE1284
USB
Type B (one expansion port)
Revision B
20