Printable Area - Epson Stylus PRO Color Large Format Inkjet Printer 7000 Service Manual

EPSON Stylus Pro 7000

1.1.4 Printable Area

LM
Paper
Feed
Printable Area
Figure 1-1. Printable Area
Product Description
PW
TM
BM
Heading
PW (width)
RM
PL (length)
LM (left margin)
TM (top)
RM (right)
BM (bottom)
Note: *The size of the margin is determined by the control panel setting.
There are three margin settings via the control panel;
3mm = All margins are set to 3mm
PL
15mm = All margins are set to 15mm
T/B 15mm TM and BM are 15mm, while LM and RM are
3mm
largest printable area and decrease chance of paper
rubbing printheads
exact paper size and decrease chance of paper rubbing
largest printable area and exact paper size
When the Paper Set Lever is:
Back
The feed path is open and you can load, remove or change the
position of paper in the feed path.
Forward
The feed path is closed and loaded paper is locked in place. You can
print on the loaded paper.
(It is not possible to change the lever position during printing.)
Features
Table 1-7. Printable Area
Roll Paper
210 ~ 610mm
(8.27 ~ 24")
Max. 90m
(298.8')
3mm/15mm*
(0.12~0.59")
3mm/15mm*
3mm/15mm*
3mm/15mm*
Table 1-8. Optimal Margin Settings
To optimize for
printheads
Revision B
Cut Sheets
210 ~ 610mm
(8.27 ~ 24")
297~915mm
(11.8~36.4")
3mm
3mm
3mm
14mm
Select this setting
Top/Bottom 15mm
15mm
3mm
17