Encoder; Fan; Elec - Epson Stylus PRO Color Large Format Inkjet Printer 7000 Service Manual

EPSON Stylus Pro 7000

ENCODER

This function confirms the operation of the CR Motor and PF Motor encoders.
To check an encoder, follow the instructions below for the corresponding
encoder.
CR encoder: Move the carriage left and right by hand
PF encoder: Turn the Grid Roller by hand
[Pause] returns you
to previous menu
[SelecType]
Encoder: CR
Encoder: PF
[Item]
Figure 5-8. Encoder Confirmation Process

FAN

This function confirms the operation of the paper vacuum fans (x2). When
this item is selected, the fan turns on. Press the Pause button to turn the fan
off and proceed to the next item.
[Pause] returns you
to previous menu
Figure 5-9. Fan Operation Check
Adjustment
XXXX
XXXX
Fan: Pause
Self-Diagnostic Mode Menus

ELEC.

This function allows you to check the maintenance record and fatal-error
record stored in the control circuit. See the Table 3-3, "Messages That
Indicate Service is Necessary," on page 84 for details on the error messages.
[Pause] returns you
to previous menu
[SelecType]
Record:Maintenance
Record:Error
[Item]
Figure 5-10. Record Menu Options
Record: Error menu
[Pause] returns you
to previous menu
[SelecType]
Error0:
Error1:
[Item]
Lists up to seven errors
Figure 5-11. Error Record Function
The errors listed here do not include CPU errors (service call errors), and the
printer lists a maximum of the most recent seven fatal errors, Error 0~6.
Revision B
[Enter]
Other
menus
[Pause]
XXXXXXXX
XXXXXXXX
172