Self-Diagnostics - Epson Stylus PRO Color Large Format Inkjet Printer 7000 Service Manual

EPSON Stylus Pro 7000

5.3 Self-Diagnostics

This section gives detailed descriptions of all adjustments necessary to
properly service and maintain this printer.
1. Make sure the Paper Set Lever is in the Set (forward) position.
2. Press the following buttons on the Control Panel while turning on the
printer.
[Paper Feed +] + [Paper Feed -] + [Enter]
3. When "Check: Test" appears on the LCD, the printer has entered the Self-
Diagnostic mode.
To exit the Self-Diagnostic mode, turn off the printer.
Adjustment
Use the Control Panel buttons to activate a Self-Diagnostic function, as
described in the table below.
Normal
Function
Pause
SelecType
Paper Source
Paper Feed +
Paper Feed -
Cut/Eject
Cleaning
Jumps up a
level
Figure 5-1. Self-Diagnostic Controls
Self-Diagnostics
Table 5-3. Self-Diagnostic Mode Controls
Self-Diagnostic
Function
Return up one Moves up one level (without selecting at
level item).
Next menu Displays the next menu.
Previous menu Displays the previous menu.
Displays the next item or increases the value
Next item or value
of the item shown on the LCD.
Previous item or Displays the previous item or decreases the
value value of the item shown on the LCD.
Enter Selects/activates the item.
Feed paper & cut
Returns to
previous menu
Proceeds to
next menu
Goes to next
or previous
Selects or
Revision B
Meaning
item
activates
the item
164