Self-Diagnostic Mode Menus - Epson Stylus PRO Color Large Format Inkjet Printer 7000 Service Manual

EPSON Stylus Pro 7000

5.4 Self-Diagnostic Mode Menus

In the Self-Diagnostic mode, you can select from the following menus.
Table 5-4. Self-Diagnostic Menus
Message
Verifies certain information such as RAM, version
Check: Test
number, panel, sensors, fatal-error history and encoder.
Adjusts certain mechanism such as printheads, sensors,
Check: Adjustment
and feed path.
Starts initial ink charge or predetermined cleaning
Check: Cleaning
sequence
Check: Print Prints nozzle check pattern or adjustment parameter list
Check: Parameter Updates or clears all of the adjustment parameters
Check: Life Tests the operation of the printer components.
The "Check: Life" menu contains tests that should only be
performed at the factory, so do not attempt to use this
menu accept where written in this manual.
In Self-Diagnostic mode, all of the tests except for one
(Rear Sensor adjustment) assume that you have loaded
roll paper. Be aware that the printer handles the paper as
if it were roll paper even if you load cut sheets.
All explanations in this mode refer to the printheads in the
following way:
B head = K/C/M side (left head when facing the printer)
C head = Lc/Lm/Y side (right head when facing the
printer)
Adjustment
Description
Self-Diagnostic Mode Menus
[SelecType]
[Paper Source]
Check: Test
Check: Adjustment
Check: Cleaning
Check: Print
Check: Parameter
Check: Life
Figure 5-2. Self-Diagnostic Menu Flow
Revision B
[Enter]
Another
kind of
menu
[Pause]
165