Feed Adjustment - Epson Stylus PRO Color Large Format Inkjet Printer 7000 Service Manual

EPSON Stylus Pro 7000

FEED ADJUSTMENT

This function adjusts the distance the printer feeds paper by correcting the
printer's distance-measurement setting.
1. Make sure "Adj. Feed" appears in the LCD, and press the Enter button.
2. The printer prints a check pattern (lines) while feeding the paper at a fixed
distance.
3. After the pattern is printed, "V Length 1000.0mm" appears. Using a
regular ruler (and the Scale Stopper, code number 1047746/1047745),
measure the printed pattern from the top line to the bottom line. Then
enter this measurement using the item select +/- buttons in 0.1mm
increments.
4. After entering the measurement, press the Enter button to finish.
Printing Pattern
V Length:
[Enter]
Enter Adjust Print
[Enter]
[Pause]
End
adjustment/
next menu
Figure 5-33. Feed Distance Check Operation
Adjustment
1000.0mm
Use the item select Paper Feed [+] or [-]
button to adjust the flushing position
("+" = to HP, "-" = away from HP)
Self-Diagnostic Mode Menus
Figure 5-34. Feed Distance Check Pattern
Revision B
189