Selectype Settings - Epson Stylus PRO Color Large Format Inkjet Printer 7000 Service Manual

EPSON Stylus Pro 7000

1.6 SelecType Settings

Entering SelecType mode
To access the control panel settings, press the SelecType button while the
printer is not printing. The printer enters the SelecType mode and cannot
print.
Using SelecType mode
1. Repeatedly press the SelecType button to view the SelecType menus
which appear in the order shown below.
Table 1-30. SelecType Menus
Display Message
PRINTER SETTING MENU
TEST PRINT MENU
PRINTER STATUS MENU
PAPER CONFIG. MENU
CUTTER REPLACE MENU
HEAD ALIGNMENT MENU
2. Press the Item button to select the choice shown in the LCD display.
3. Press the SelecType button to view the options for that Item.
4. Press the "+" button or "-" button to view the available values for an
option.
5. Press the Enter button to record the current option or to execute the
operation shown in the display.
Product Description
For details, see
"Printer Setting Menu" on page 41
"Test Print Menu" on page 42
"Printer Status Menu" on page 44
"Paper Configuration Settings" on page 44
"Cutter Replacement Menu" on page 45
"Head Alignment Menu" on page 46
Exiting SelecType mode
Select one of the following methods to exit SelecType mode:
Press the Pause button while in SelecType mode; the printer is ready
to print.
Perform the printer initialization.
Print a status sheet.
Print a nozzle check pattern.
Replace the cutter.
Press the SelecType button several times at the top level of
SelecType menus.
Press the SelecType button one time at the second level of SelecType
menus.
SelecType Settings
Revision B
40