EPSON Stylus Pro 7000
SELF-DIAGNOSTIC MODE
Power-on button:
Paper Feed
This mode is used primarily for replacing worn-out printer parts and
adjustment operations. For details, see Chapter 5, "Adjustment".
Product Description
↓
+ Cut/Eject + Cleaning
1.9 Firmware Update
The information contained in this section is not to be shared
publicly.
The firmware contained on the Main Board is Flash ROM; therefore if you
need to update the firmware or replace the Main Board, see "Parameter
Backup" on page 159 and "Firmware Update" on page 162 for details.
Firmware Update
Revision B
51