Version - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME version - display firmware version
SYNOPSIS version -c xcp [-v] [-t]
version -c {cmu | xscf} [-v]
version -h
DESCRIPTION The version(8) command displays firmware version.
The following versions can be displayed:
xcp
cmu
xscf
You must have platadm or fieldeng privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-c xcp
-c cmu
-c xscf
-h
-t
-v
EXAMPLES
EXAMPLE 1
The comprehensive version of the XSCF control package (XCP)
firmware currently applied to the system.
The version of OpenBoot PROM firmware.
The version of XSCF firmware.
Displays the XCP version.
Displays the version of OpenBoot PROM firmware.
Displays the version of XSCF firmware.
Displays usage statement. When used with other options or
operands, an error occurs.
Displays information of the XCP version that is registered in the
XSCF. This option is used together with "-c xcp".
Displays detailed information. Specifying this option with "-c
xscf" displays the same information as the usual information.
Displays the XCP version.
version -c xcp
XSCF>
XSCF#0 (Active)
XCP0 (Current): 1090
XCP1 (Reserve): 1090

version(8)

System Administration 481