Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 330

showcod(8)
EXIT STATUS
SEE ALSO
308 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
The output shown is what you would see if you had platform privileges.
showcod
XSCF>
Chassis HostID : 81000001
PROC RTUs installed : 8
PROC Headroom Quantity : 0
PROC RTUs reserved for domain 0 : 4
PROC RTUs reserved for domain 1 : 0
PROC RTUs reserved for domain 2 : 0
PROC RTUs reserved for domain 3 : 0
PROC RTUs reserved for domain 4 : 0
PROC RTUs reserved for domain 5 : 0
PROC RTUs reserved for domain 6 : 0
PROC RTUs reserved for domain 7 : 0
PROC RTUs reserved for domain 8 : 0
PROC RTUs reserved for domain 9 : 0
PROC RTUs reserved for domain 10 : 0
PROC RTUs reserved for domain 11 : 0
PROC RTUs reserved for domain 12 : 0
PROC RTUs reserved for domain 13 : 0
PROC RTUs reserved for domain 14 : 0
PROC RTUs reserved for domain 15 : 0
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
setcod(8)