Showtimezone - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showtimezone - display the XSCF time zone and Daylight Saving Time information
of current settings
SYNOPSIS showtimezone -c tz
showtimezone -c dst [-m {standard | custom}]
showtimezone -h
The showtimezone(8) command displays the XSCF time zone and Daylight Saving
DESCRIPTION
Time information of current settings.
You must have one of the following privileges to run this command:
Privileges
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
-c tz
-c dst
-h
-m {standard | custom} Specifies the Daylight Saving Time information to be
EXTENDED
■
DESCRIPTION
std
The Daylight Saving Time information is displayed in the following format.
When specified custom:
■
std offset dst[offset2] [from-date[/time] to-date[/time] ]
Abbreviations of time zone.
Displays the time zone.
Displays the Daylight Saving Time information.
Displays usage statement. When used with other
options or operands, an error occurs.
displayed. Either of the following can be specified. If the
-m option omitted, it is regarded as "-m custom"
specified.
standard
Displays the Daylight Saving Time information that has
been set in the current time zone by default.
custom
Displays the Daylight Saving Time information that you
set by using the settimezone(8) command. If the
Daylight Saving Time is not set, nothing displayed.

showtimezone(8)

System Administration 449