Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 279

Makes the supplied user known to the agent for subsequent
create
SNMP communication. When used without the -a or -p options,
create displays a prompt for passwords and reads them without
echoing them to the screen. The encryption protocol used in all
SNMP communication is Data Encryption Standard (DES). An
authentication protocol must be chosen for SNMP
communication. Possible values are MD5 Algorithm and Secure
Hash Algorithm (SHA).
user
-a authentication_protocol
-e encryption_password
-p authentication_password
Removes the supplied user making the user unknown to the
delete
agent for subsequent SNMP communication.
user
Changes the appropriate password for the specified user. The
passwd
changed password is either the authentication password or the
encrypted password, or both, if -c is not used. If -c is not used
then both passwords must be the same or an error is generated.
With no options, password displays a prompt for the passwords
and reads them without echoing them to the screen.
-c auth|encrypt
-n new_password
-o old_password
user
Specifies a valid user name.
Specifies the authentication protocol.
Specifies the encryption password. Must be equal to or greater than
8 characters.
Specifies the authentication password. Must be equal to or greater
than 8 characters.
Specifies a valid user name.
setsnmpusm(8)
Specifies whether to change the
authentication password or the
encrypted password.
Specifies the new password. The
password must be equal to or
greater than 8 characters.
Specifies the old password.
Specifies a valid user name.
System Administration 257