Setautologout - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME setautologout - set the session timeout time of the XSCF shell
SYNOPSIS setautologout -s timeout
setautologout -h
DESCRIPTION The setautologout(8) command sets the session timeout time of the XSCF shell.
The default of the session timeout time is 10 minutes.
You must have platadm or fieldeng privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-h
-s timeout
EXTENDED The specified session timeout time becomes effective after the subsequent login.
DESCRIPTION
EXAMPLES
EXAMPLE 1
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO showautologout(8)
Displays usage statement. When used with other options or
operands, an error occurs.
Specifies the session timeout time of the XSCF shell. Specify a
timeout time value in units of minutes for timeout. An integer
ranging from 1 to 255 can be specified.
Sets the session timeout time of the XSCF shell to 30 minutes.
setautologout -s 30
XSCF>
30min
Successful completion.
An error occurred.

setautologout(8)

System Administration 155