Showtelnet - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showtelnet - display the current status of the Telnet service for the XSCF network
SYNOPSIS

showtelnet

showtelnet -h
DESCRIPTION showtelnet(8) command displays the current status of the Telnet service for the
XSCF network.
One of the following states is displayed:
enable
disable
You must have one of the following privileges to run this command:
Privileges
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
-h
EXTENDED The settelnet(8) command makes settings for the Telnet service in the XSCF
DESCRIPTION network.
EXAMPLES
EXAMPLE 1
The following exit values are returned:
EXIT STATUS
0
>0
SEE ALSO settelnet(8)
The Telnet service is enabled.
The Telnet service is disabled.
Displays usage statement.
Displays the status of the Telnet service for the XSCF network.
showtelnet
XSCF>
Telnet status:enabled
Successful completion.
An error occurred.
showtelnet(8)
System Administration 447