The settings of the current modes of operation for the specified domain can be
■
checked by using the showdomainmode(8) command. When you use the
showdomainmode(8) command after the setdomainmode(8) command, it will
display the pending modifications performed by the setdomainmode(8), which
might not yet be effective.
EXAMPLES
EXAMPLE 1
XSCF>
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
The specified modes will be changed.
Continue? [y|n]:
configured.
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
EXAMPLE 2
XSCF>
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
The specified modes will be changed.
Continue? [y|n]:
configured.
Diagnostic Level
Secure Mode
receive)
Autoboot
CPU Mode
Sets the OpenBoot PROM diagnostic level for domain ID 0 to none.
setdomainmode -d 0 -m diag=none
:min
:on
:on
:auto
y
:none
:on (host watchdog: available Break-signal:non-receive)
:on (autoboot:on)
:auto
Enables the auto boot function for domain ID 0. Automatically answers "y" to
all prompts.
setdomainmode -y -d 0 -m autoboot=on
:none
:on
:off
:auto
y
:none
:on (host watchdog: available
:on (autoboot:on)
:auto
-> none
-> -
-> -
-> -
-> -
-> -
-> on
-> -
System Administration
setdomainmode(8)
Break-signal:non-
177