Showaltitude - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showaltitude - display the altitude of the system and whether the air filter installed
SYNOPSIS

showaltitude

showaltitude -h
DESCRIPTION The showaltitude(8) command displays the current settings for the altitude of
the system and whether the air filter installed.
Whether the air filter installed is displayed on the M4000/M5000 servers only.
The displayed altitude value is a multiple of 100 meters.
You must have platadm or fieldeng privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
-h
EXTENDED
■
DESCRIPTION
■
EXAMPLES
EXAMPLE 1
EXAMPLE 2
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO setaltitude(8)
Displays usage statement.
The air filter is displayed only when it is installed. If the filter is not installed
nothing is displayed.
The setaltitude(8) command sets the altitude of the system and whether or
not the air filter installed.
Displays the altitude of the system.
showaltitude
XSCF>
1000m
Displays the altitude of the M4000/M5000 servers with the air filter installed.
showaltitude
XSCF>
1000m
Filter is installed.
Successful completion.
An error occurred.
showaltitude(8)
System Administration 287