Showdualpowerfeed - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showdualpowerfeed - display the current setting of dual power feed mode
SYNOPSIS

showdualpowerfeed

showdualpowerfeed -h
DESCRIPTION The showdualpowerfeed(8) command displays the current setting of dual power
feed mode in the system.
The showdualpowerfeed(8) command is valid in the M3000/M4000/M5000
servers only.
The dual power feed mode can be set by the setdualpowerfeed(8) command.
Also, before the dual power feed mode is changed by the setdualpowerfeed(8)
command, the values of changed settings are displayed.
You must have platadm or fieldeng privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
The following options are supported:
OPTIONS
-h
EXAMPLES
EXAMPLE 1
EXAMPLE 2
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO setdualpowerfeed(8)
Displays usage statement.
Displays the current setting of dual power feed mode in the system.
showdualpowerfeed
XSCF>
Dual power feed is enabled.
Changes the dual power feed mode with the setdualpowerfeed(8) com-
mand and then displays the current state.
showdualpowerfeed
XSCF>
enable -> disable
NOTE: Dual power feed will be disabled the next time the platform is powered
on.
Successful completion.
An error occurred.
showdualpowerfeed(8)
System Administration 347