Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 325

You must have one of the following privileges to run this command:
Privileges
platadm, platop, fieldeng
domainadm, domainmgr, domainop
Refer to setprivileges(8) for more information.
The following options are supported:
OPTIONS
-a
-c sp
-d domain_id
-h
-v
OPERANDS The following operand is supported:
xsb
EXAMPLES
EXAMPLE 1
XSCF>
XSB
---- -------- ----------- ---- ---- ---- ------- --------
Can execute the command for all domains.
Can execute the command only for accessible domains.
Displays the state of XSBs configured in or assigned to a domain
and the state of all mounted XSBs.
Displays the system boards located in the system board pool.
System boards in the system board pool do not belong to any
domain.
Specifies the ID of the domain whose status of XSB is displayed.
Only information that is defined with the DCL of the specified
domain is displayed. An integer ranging from 0 to 23 can be
specified for domain_id, depending on the system configuration.
Displays usage statement. When used with other options or
operands, an error occurs.
Displays detailed information on XSB.
Specifies the XSB number to be displayed. The following xsb
form is accepted:
x–y
where:
x
y
Displays information on all mounted system boards.
showboards -a
DID(LSB) Assignment
An integer from 00–15.
An integer from 0–3.
Pwr Conn Conf Test
showboards(8)
Fault
System Administration 303