Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 448

Xscf control package (xcp) 109x

Hide thumbs Also See for SPARC Enterprise M3000:

Table of Contents

showroute(8)

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

Displays usage statement. When used with other options or

operands, an error occurs.

Displays text by page. This option provides a function that is the

same as that of the more command.

Displays IP address without the name resolution of host name.

The following operand is supported:

Specifies the network interface whose information is to be

displayed. One of the following values can be specified,

depending on the system configuration. If this operand is

specified with the -a option, the operand is ignored.

For XSCF unit 0:

xscf#0-lan#0

xscf#0-lan#1

For abbreviation:

For XSCF unit 0:

xscf#0-lan#0

xscf#0-lan#1

For XSCF unit 1 :

xscf#1-lan#0

xscf#1-lan#1

The setroute(8) command sets routing information for the XSCF network.

In the M3000/M4000/M5000 servers:

In the M8000/M9000 servers: