Showfru - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showfru - display the hardware settings of specified device
SYNOPSIS showfru device location
showfru -a device
showfru -h
DESCRIPTION The showfru(8) command displays the hardware settings of specified device by the
setupfru(8) command.
The command can display the settings of the specified device or of all devices. Only
the physical system board (PSB) can be specified as a device.
The following settings are displayed:
Device
Location
XSB Mode
Memory Mirror
Mode
You must have platadm or fieldeng privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported.
-a
-h
Specified device name. Only sb is displayed.
Device location. If the device is "sb", the indicated location is an
integer ranging from 00 to 15.
XSB mode set for the PSB. One of the following values is
displayed:
Uni-XSB
Uni
Quad-XSB
Quad
Memory mirror mode set for the PSB. One of the following
values is displayed:
Memory mirror mode
yes
Memory no-mirror mode
no
Displays the settings of all devices.
Displays usage statement. When used with other options or
operands, an error occurs.

showfru(8)

System Administration 357