NAME
showarchiving - display log archiving configuration and status
SYNOPSIS
showarchiving
showarchiving [-e] [-v]
showarchiving -h
DESCRIPTION
showarchiving(8) displays the status and configuration information for log
archiving on the Service Processor.
You must have platadm, platop or fieldeng privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS
The following options are supported:
-e
-h
-v
EXTENDED
If the -e option is not specified, showarchiving displays the following
DESCRIPTION
information:
1. A list of archiving configuration data:
Archiving state
Archive host
Archive directory
Displays information about the last ten archiving errors.
Displays usage statement.
When used with other options or operands, an error occurs.
Specifies verbose output.
Log archiving is enabled or disabled.
The host on which the logs are archived. Initial
value is Not configured. Possible values are
a host name or IPv4 address.
The directory on the archive host where the
archives are stored. Initial value is Not
configured.
showarchiving(8)
System Administration
289