Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 282

setsnmpvacm(8)
OPERANDS
EXAMPLES
260 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007
The following operands are supported:
Sets access to a MIB view for the specified group.
createaccess
-r read_viewname
groupname
Sets up a group for the specified user for view access.
creategroup
-u username
groupname
Sets up a view of the SNMP Agent exported MIB information.
createview
View access is limited to read-only for this Agent. The view is
identified through a MIB OID subtree and can be limited to
specific portions of that subtree using the OID Mask.
-e
-m OID_Mask
-s OID_subtree
viewname
Removes access entry.
deleteaccess
groupname
Removes a group from use.
deletegroup
-u username
groupname
Removes this view from use.
deleteview
-s OID_subtree
viewname
Create a Group
EXAMPLE 1
setsnmpvacm creategroup -u jsmith admin
XSCF>
Specifies an SNMP Agent view.
Specifies a valid group name.
Specifies a valid user name.
Specifies a valid group name.
Specifies an excluded view. The default is an
included view.
Specifies a valid OID subtree mask. By
default, the mask is ff (entire subtree).
Specifies a MIB OID subtree. Values start at
.1 for the entire MIB tree.
Specifies a valid view name.
Specifies a valid group name.
Specifies a valid user name.
Specifies a valid group name.
Specifies a MIB OID subtree. Values start at
.1 for the entire MIB tree.
Specifies a valid view name.