Setsnmpvacm - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME setsnmpvacm - modify the SNMPv3 agent's View-based Access Control Model
(VACM) configuration
SYNOPSIS setsnmpvacm creategroup -u username groupname
setsnmpvacm deletegroup -u username groupname
setsnmpvacm createview -s OID_subtree [-e] [-m OID_Mask] viewname
setsnmpvacm deleteview -s OID_subtree viewname
setsnmpvacm createaccess -r read_viewname groupname
setsnmpvacm deleteaccess groupname
setsnmpvacm -h
DESCRIPTION setsnmpvacm(8) modifies the SNMP Agent's VACM configuration. Using this
command requires a basic knowledge of SNMP.
You must have platadm privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-h
Displays usage statement.
When used with other options or operands, an error
occurs.

setsnmpvacm(8)

System Administration 259