Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 27

showdscp
showdualpowerfeed display the current setting of dual power feed mode
showemailreport
showenvironment
showfru
showhardconf
showhostname
showhttps
showldap
showlocale
showlocator
showloginlockout
showlogs
showlookup
showmonitorlog
shownameserver
shownetwork
shownotice
showntp
showpasswordpolicy display the current password settings
showpowerupdelay
showresult
display the IP addresses assigned to the Domain to Service
Processor Communications Protocol (DSCP)
display the email report configuration data
display the air flow volume, intake air temperature and
humidity, temperature sensor, voltage sensor, fan speed,
and power consumption information in the server
display the hardware settings of specified device
display information about Field Replaceable Units (FRUs)
installed in the system
display the current host name for the XSCF unit
display the status of the HTTPS service set for the XSCF
network
display the Lightweight Directory Access Protocol (LDAP)
configuration for the Service Processor
display the current setting for the XSCF locale
display the state of the CHECK LED on the operator panel
display the account lockout setting
display the specified log
display the configuration for authentication and privileges
lookup
display the contents of monitoring messages in real time
display the registered domain name system (DNS) servers
specified on the XSCF network
display information of network interfaces for XSCF
display copyright and license information for the copyright
information for eXtended System Control Facility (XSCF)
Control Package (XCP)
display the NTP servers currently set for the XSCF network
display the current settings for the warm-up time of the
system and wait time before system startup
display the exit status of the most recently executed
command
Intro(8)
Intro 5