Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 24

Intro(8)
2 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
fmdump
fmstat
getflashimage
ioxadm
man
moveboard
nslookup
password
ping
poweroff
poweron
prtfru
rebootxscf
replacefru
reset
resetdateoffset
restoreconfig
restoredefaults
sendbreak
setaltitude
setarchiving
setaudit
setautologout
setcod
setdate
view fault management logs
report fault management module statistics
download a firmware image file
manage External I/O Expansion Units
display manual pages of specified XSCF shell command
move an eXtended System Board (XSB) from the current
domain to another
refer to the DNS server for the host
manage user passwords and expiration settings
send the ICMP ECHO_REQUEST packets to the network
host or the network device
turn off the power to the specified domain
turn on the power to the specified domain
display FRUID data on the system and External I/O
Expansion Unit
reset the XSCF
replace a Field Replaceable Unit (FRU)
reset the specified domain
reset time of domains to match system time
restore the system configuration information previously
saved by dumpconfig
delete the setting and the log information that stored in the
server or the XSCF unit, and restore it to the state as of the
factory shipment
send a break signal to the specified domain
set the altitude of the system or whether or not the air filter
installed
configure the log archiving functionality
manage the system auditing functionality
set the session timeout time of the XSCF shell
set up the Capacity on Demand (COD) resources used for
domains
set the date and time of XSCF