Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 145

*Note*
EXAMPLE 3
XSCF>
EXAMPLE 4
XSCF>
DomainID to panic:00
Continue? [y|n]:
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO poweroff(8), poweron(8), setdomainmode(8), showdomainstatus(8)
This command only issues the instruction to reset.
The result of the instruction can be checked by the "showlogs power".
Resets domain ID 0. Suppresses prompts, and automatically answers "y" to
all prompts.
reset -q -y -d 0 por
Cancels the reset command execution that is in progress.
reset -d 0 panic
n
Successful completion.
An error occurred.
reset(8)
System Administration 123