If the specified timeout is too brief for the configuration, the login process or
■
retrieval of user privilege settings could fail. In such case, specify larger value for
the timeout and then execute again.
Notes on LDAP/SSL
If the specified timeout is too brief for the configuration, the login process or
retrieval of user privilege settings could fail. In such case, specify larger value for the
timeout and try again.
Notes on Power Consumption Monitoring
Function (M3000 Server)
The amount of power consumption might not be indicated correctly in the MIB
■
information, in the showenvironment power command output, and on the
XSCF Web in the following cases; and you should wait for one minute and check
the value again.
■
■
The figures on the power consumption monitoring function represent the
■
dissipation power from the server. The figures of peripheral devices are not
included.
Notes on Airflow Indicator
The amount of exhaust air might not be indicated correctly in the MIB
■
information, in the showenvironment air command output, and on the XSCF
Web in the following cases; and you should wait for one minute and check the
value again.
■
■
The figures on the airflow indicator represent the volume of air exhausted from
■
the server. The figures of peripheral devices are not included.
6
SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1112 • May 2012
During the server powering on or powering off, or for a while after the power-
on or power-off complete
During the active replacement of power supply unit, or for a while after the
active replacement complete
During the server powering on or powering off, or for a while after the power-
on or power-off complete
During the active replacement of power supply unit, or for a while after the
active replacement complete