Installing Printer Drivers In Host View; Upgrading Printer Drivers In Host View - Kyocera TASKalfa 3051ci Operation Manual

Host
3
4
5

Installing Printer Drivers in Host View

1
2
3
4
5
6
7

Upgrading Printer Drivers in Host View

1
5-4
Double-click Windows Firewall: Allow inbound remote administration
exception.
Select Enabled to allow remote administration for the computer.
Click OK.
You can use the Driver Installation wizard to install printer drivers.
In Host view, select one or more host computers.
In the Host menu, click Install driver.
In the Driver Installation wizard, select whether to install with or without a
device:
Select Install driver with device if the physical printing devices appear in
the Device view and available on the network. Click Next to display a list of
all available devices. Select one or more printer models to install, and click
Next. Click Have disk, browse to find a valid .INF file for each driver being
installed, and then click Open. Click OK to exit the dialog box, and then click
Next to proceed.
Select Install driver without device if the physical printing devices are not
available on the network. Click Next, and then click Have disk and browse
to find a valid .INF file for each driver being installed. Click OK to exit the
Have disk dialog box, and then select one or more drivers to install. Click
Next.
On the Printer settings page, select available settings for each printer driver.
The following options open another dialog box for selecting settings:
You can click Common settings and apply settings to all selected devices.
You can click Conflicts and select from available options.
You can click Import and select a configuration settings file (.KVP).
You can click Export and save current configuration settings in a .KVP file.
Click Next.
On the Confirm settings page, review your selections.
Click Finish to install the printer drivers. When installation is finished, you can
click Export to save a log file (.TXT).
Click OK.
You can upgrade installed printer drivers to a later version.
In Host view, select one or more host computers.
User Guide